Tuesday, December 18, 2018

FCS Surfboard Fins

FCS is one of the top surfboard fin brands. The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing; the surfer, the surfboard and the fins. When paired with fins from the new FCS II Essential Series, it's now possible to install and remove your fins in seconds, without the need for any screws or tools.

What you'll find when you ride the new FCS II system is more speed, more drive, more acceleration, and most importantly more response from your board. This equates to better surfing, and you'll be in the line up faster. Ride with FCS fins today.

Test out the entire collection of FCS surfboard fins without committing to buying anything by surfing on over to Finatic.com and sign up for their subscription platform to try all the surfboard fins you want! Test fins. Review fins. Return fins. Repeat.

Surfboard Fins Subscription Program


Here's a quick overview of what to expect with the Finatic Fin Testing Program. Become a member of the Finatic Fin Testing Program and test fins from all your favorite brands, Including FCS, FCS II, Future Fins, Kinetik Racing Fins, 3D Fins, Gorilla Fins, Rainbow Fins, Turbo Tunnel and more!

Get your surfboard fins at www.Finatic.com

Monday, December 17, 2018

Great Dog Raising Advice

Dogs love to jump, run and play. They like to eat, even when it is an item they shouldn't chew on. They also love to give you all the kisses in the world. Your responsibility is to take the best care you can of your dog, and this article will show you how it's done.

Never leave your dog with just anyone when you’re away. To find the most reputable dogsitters, Google “dog boarding near me” for times you’re going to be gone long, like for work trips, or search “dog daycare near me” for times you’ll be gone all day.

Never allow your dog to ride in a car unsecured. Sitting on your lap or in the front seat is dangerous both to him and your ability to drive. Always place him in an appropriately sized pet carrier or invest in a pet seat belt that will keep him snug and safe in the middle of the back seat.

Talk to your vet about what you feed your dog. A puppy's stomach may not be able to properly digest certain brands, sometimes causing an adverse reaction. Use care when feeding your dog.

If you notice your dog gets dry skin in the winter, you probably need to brush him or her more often. Doing so will get rid of old fur and help get their oil glands working properly. Try brushing once in the morning and once in the evening to see if it makes a difference for your pet.

Keep your dog warm during winter with the latest in canine fashion and accessories. You may think it's just for show, but dogs need protection from the elements too! Keeping your dog's paw-pads dry is essential to their health in sub-freezing weather, so invest in suede or leather footwear and pick him up a coat while you're at it. Make them instead if you are creative!

If you do not have any ear cleaner solution on hand, you can use a baby wipe instead. Simply wrap it around the tip of your finger and wipe the inside of the ear's surface. Only go as far as your finger can easily fit. Do not use Q-tips as they can injure the ear.

Getting a dog on a whim is rarely a good idea. You need to make sure you can afford to feed a dog and cover medical expenses before getting a pet. Research different breeds to figure out which dog would be best for your family, your lifestyle and the size of your home.

Do not make training your dog seem like a chore. Dogs pick up on this negative energy and will have a difficult time learning if you are not in the right mind frame. Make it fun and try to look at it as a bonding experience with your pet. When your dog is having fun, they will learn their training quicker.

Know the symptoms of dehydration in your dog, as it is a common ailment that can be dangerous. Particularly during hot dry summer months, your dog may pant excessively and experience a loss of the elasticity of his skin. If you see this, encourage him to drink water and add a little Pedialyte to rehydrate him.

If your pet slips up and uses the bathroom in your home, be sure to remove every trace of the mess. Use a cleaner that gets rid of smells. If any scent from their excrement is left behind, they may keep soiling that area.

Although some dogs do well on the recommended amount of food to be given each day, some dogs need more or less. Instead of just going by what your food says to feed your dog, try to keep an eye on your dog's body. If you notice that your dog is gaining a bit of weight, cut the food intake back a bit.

If your dog seems to have a bad reaction from every shampoo you use on him, try a green product. Most commercial brands of dog shampoo contain a lot of things like phosphates and sulfates, which can irritate your dog's skin. They are also harmful to the environment so you'll be solving two problems at once.

If you're considering introducing trick commands to your dog, make sure that you have first covered all of the basic commands, such as sit, lay down, stay, and come. Although trick commands are fun and entertaining, having a well-mannered dog is more beneficial. Having a dog "stay" when asked will be more fulfilling than having a dog "play dead."

Ask your regular vet about the brand of food your dog should be eating. Choose a diet that is adapted to the health of your dog. If this is a category your dog falls into, giving him the improper food can put his health in jeopardy. Your vet will be able to recommend a diet that is best for your dog.

If you won't be the only person tending for your dog, make sure that everyone who will be taking care of the dog is on the same page. If you have one way of doing things and your significant other has another way, you should sit down and explain the ways and figure out which one will be applied constantly by both people.


Now that you have some simple tips to use with your dog, you should feel more confident in being a pet owner. That will result in a happier life for both you and your puppy pal. Don't stop learning here, instead keep reading all you can to ensure you're always up on the latest when it comes to dog ownership.

Friday, December 14, 2018

Common Orthopedic Surgeries


The human skeleton is the internal framework of the body. It is composed of around 270 bones at birth – this total decreases to around 206 bones by adulthood after some bones get fused together. When it comes to orthopedic surgery this equates to a lot of different potential injuries that may require medical assistance.

FYI: Orthopedics is a category of practiced medicine and surgery the deals with conditions involving the musculoskeletal system. A sub-category of orthopedics is sports medicine, which deals with injuries sustained from physical activities.
The following are the most common orthopedic surgeries performed by US hospitals.

Total Joint Replacement

Total joint replacement is a surgical procedure in which parts of an arthritic or damaged joint are removed and replaced with a metal, plastic or ceramic device called a prosthesis. The prosthesis is designed to replicate the movement of a normal, healthy joint.

Total Shoulder Replacement

Total shoulder replacement arthroplasty is a well-established surgery for restoring comfort and function to the arthritic shoulder. In this procedure the arthritic ball is replaced by a smooth met- al ball fixed to the arm bone (humerus) by a stem that fits within it.

Spine/Back Surgery

Back surgery is a procedure that aims to change a patient's anatomy, such as removing a painful herniated disc, with the purpose of providing pain relief. Back surgeries vary, with some procedures minimally invasive allowing for quick recovery and others more extensive requiring longer recoveries.

ACL Reconstruction

ACL reconstruction is surgery to reconstruct the ligament in the center of your knee. The anterior cruciate ligament (ACL) connects your shin bone (tibia) to your thigh bone (femur). A tear of this ligament can cause your knee to give way during physical activity.

Human Skeleton Anatomy


The human skeleton has 206 bones. Arms are among the most commonly broken bones, accounting for almost half of all adults' broken bones and requiring orthopedic surgery to right the fracture. If you don’t know where your nearest surgical center is, Google “hospitals near me” to locate one close by.



Thursday, December 13, 2018

Knee Pain and Prolotherapy Injections


The following was originally posted at: https://www.pegasuspain.com/prolotherapy-for-knee-pain/

The knee is the largest joint in the body. A wide variety of inflammatory, mechanical, or traumatic injury on the knees can occur anytime at any age. Currently, the leading causes of knee injuries are ligament strains and tears. Other knee problems arise as a result of the degenerative process in relation to aging.

Knee pains can occur at the bones, joints, cartilages, or ligaments. These areas are prone to injury, and there are times when the healing process may not be adequate to restore the damage. Aside from delayed healing process, they may also become weak due to genetic variation. Research suggests that some genes predispose a person to have weaker tissues and joints.
Others experience knee pain due to hormonal changes, pregnancy, hypothyroidism, and other co-existing medical conditions such as bone deformities, arthritis, and chronic strain on the tendon fibers and ligaments.


Prolotherapy, otherwise known as regenerative injection therapy, is a form of treatment which involves the injection of a solution to stimulate healing. It works by increasing cell growth factor levels to encourage tissue repair and healing.

How Prolotherapy Works

The injected solution in prolotherapy causes a low-grade inflammatory response at the site of the injured knee joints. This induced inflammatory mechanism tricks the immune system to initialize “tissue repair.” It happens via activation of the “fibroblasts”—the cells responsible for synthesizing the collagen and other substances that play essential roles in wound healing.

Typical Prolotherapy Treatment Course

The average number of prolotherapy sessions is around 3 – 6, with some cases necessitating more or less. Treatment sessions vary, depending on the severity of the patient’s condition. If improvements are not observed after four treatment sessions, a re-assessment or re-evaluation might be performed to determine if there are interfering factors that prevent the healing process.
Some factors that may delay the regenerative process of prolotherapy include: poor sleep, noncompliance, diet changes, continued aggravating activities, unhealthy lifestyle, other illnesses, or use of medications that may hinder the healing process.

Prolotherapy: A Long-Term Solution

Clinical studies have shown that prolotherapy helps in stimulation and regeneration of cartilages.  Many medical specialists also believe that it is an exceptional treatment solution for different knee problems. Since it is a treatment approach that has been clinically proven effective, it is usually considered for management of knee pains before undergoing any invasive medical procedures such as surgeries, or long-term narcotic interventions.

Treatment result may vary from patient to patient, but with the advantages it offers, prolotherapy is something to be considered.

In North Texas? Connect with the Dallas pain management pros at Pegasus Pain Management today.

Sports Medicine: Overuse Injuries

The following useful information was originally posted at www.practicalpainmanagement.com.

The evaluation and management of chronic overuse sports/athletic injuries is one of the most pervasive concerns in sports medicine today. Overuse sports injuries outnumber acute, instantaneous injuries in almost every athletic activity. Because overuse sports injuries are not instantly disabling they attract less medical attention than those that cause an acute and obvious loss of function. Therefore, their frequency of occurrence is almost always underestimated in surveys of athletic injuries. The treatment of overuse sports injuries is made difficult by various factors, including an insidious onset which means that the problem is usually ignored at the start. When athletes actually present for treatment, the injuries are well established and more difficult to manage successfully. Additionally, these injuries seem less serious to the athletes and makes it difficult to convince them of the importance of intensive treatment for correction.

Overuse injuries are almost always a result of change in three general areas: the athlete, the environment, or the activities. Identifying these changes requires patience, precision in history-taking, and a great understanding of the demands of the specific sporting activity. The most common cause of overuse athletic injuries is continued athletic participation despite the presence of symptoms associated with another injury (eg. pitcher who continues to throw despite persistent elbow tendonitis). Continued participation with an existing injury also occurs as the result of inadequate rehabilitation.

Some overuse dysfunctions are the result of normal physiological changes such as rapid growth spurts in which musculotendinous flexibility often decreases and indirectly causes tendonitis (eg. Osgood-Schlatter knee syndrome). Environmental alterations occur in the athlete’s personal environment (eg. equipment and clothing) or the more global sports environment (eg. running hills in a training regimen previously limited to running flat surfaces). Advancing to a higher level of athletic proficiency involves both quality and quantity of workouts. Even increasing workout time in an abrupt manner can result in overuse athletic injuries, especially when an athlete attempts to perfect a single, isolated skill.

The prevention of recurrences of overuse injuries is the most important aspect of managing overuse injuries thus, the physician’s role becomes one of reinforcing and reminding the athlete to identify the appropriate changes to be made in their regimen…

To continue reading this in-depth pain management article click on the following link: https://www.practicalpainmanagement.com/pain/acute/sports-overuse/chronic-overuse-sports-injuries.

In Texas? To connect with the Dallas pain management doctors to help relieve your discomfort you don’t need to Google “pain management doctor near me” because you can go to PegasusPain.com.

Wednesday, December 12, 2018

North Texas Dirt Work Contractor


Residential. Ranch. Commercial. Industrial. Marley Dozer Service does it all. If you need dirt moved around or removed, Marley Dozer Service moves it. They realize that they’re not the only excavating contractor in Texas, but they guarantee to be the most dedicated to making sure your job gets done right the first time.

They’ve been working in the land clearing, bulldozer services and dirt work services industry for many years now and they know North Texas land just about as well as anybody. Our state has various types of soil and each kind needs a different approach to make sure your project has a proper foundation to be built upon.

No need to Google search the typical “excavation contractors near me” or “dirt work near me” to find the best land clearing services around. Marley’s got that under control.  Rest easy and put your next job in the trustworthy hands of Marley Dozer Service and let us handle your DFW excavation and dirt work needs.

  • Brush & land clearing
  • Pads made for residential homes, rural barns, commercial businesses, industrial warehouses
  • Ponds (Tanks) made or rebuilt
  • Tree roots and stump removal
  • Construct, water and grade new and existing gravel and crushed rock roads for rural, residential and commercial properties


Marley Dozer Service does it! Give them a call at (940) 229-1839 or visit http://marleydozerservice.com/

Tuesday, December 11, 2018

About Surfing Wetsuits


What is a surfing wetsuit?

A wetsuit is a garment, usually made of foamed neoprene, which is worn by surfers, divers, windsurfers, canoeists, and others engaged in water sports and other activities in or on water, primarily providing thermal insulation, but also buoyancy and protection from abrasion, ultraviolet exposure and stings from marine organisms. The insulation properties depend on bubbles of gas enclosed within the material, which reduce its ability to conduct heat. The bubbles also give the wetsuit a low density, providing buoyancy in water.

Why do surfers wear wetsuits?

A wetsuit works by getting wet and then trapping a thin layer of water against your body which then heats up and keeps you warm.

When should you use a wetsuit?

Commercial wetsuit manufacturers suggest wearing a wetsuit that is 1/16 to 1/8 inch thick in water. In water 50 to 75 degrees Fahrenheit, you should use a wetsuit that is 3/16 to 1/4 inch thick.

How do you take care of a wetsuit?
  • Rinse your gear with fresh water. Do not use hot water, use cool or tepid water.
  • Never wash your wetsuit in a washer or with other garments.
  • Use a special wetsuit cleaner that will help remove salt, chlorine and organic residues.
  • Hang to drip dry away from direct heat and sun.

Where’s the best place to buy a wetsuit?

There a lots of local beach shops to buy a surfing wetsuit, but no place has a larger selection than the #1 surf shop online, TheSurfboardWarehouse.com. In addition to wetsuits, get your surfboards, surfboard fins, and other surf gear for a great price and shipped directly to your door.

About Surfboards



surf·board

/ˈsərfbôrd/

noun

Short definition: A long, narrow streamlined board used in surfing.

Long definition:

A surfboard is an elongated platform used in surfing. Surfboards are relatively light, but are strong enough to support an individual standing on them while riding an ocean wave. Major advances over the years include the addition of one or more fins on the bottom rear of the board to improve directional stability, and numerous improvements in materials and shape.

The Surfboard Warehouse (https://www.thesurfboardwarehouse.com/) is the largest surf shop online for surf accessories and surf gear like Surfboards, Surf Fins, Surfboard Bags, Surfing Wetsuits and more!

Monday, December 10, 2018

Copier Defined


cop·i·er

/ˈkäpēər/

noun

A machine that makes exact copies of something, especially documents, video or audio recordings, or software.

1. Copier.
  •         A person or thing that copies; copyist.
  •      Photocopier.
  •         Copy machine.


2. Copier.

Etymology for copier

Circa 1590s, agent noun from copy (verb)

Used in hypothetical sentences:

The nearest office copier is on the second floor.

Mr. Ford has asked me to fix the copier in the break room.

I need to make duplicates of the presentation via the office copier.

9 Ways to Make Money Online


"I want to earn money online, but where do I start?" If this is part of your inner monologue, then you are already ahead of most people because you have that steady drive, determination, and initiative that your fellow office drones still waiting in line at the office copier simply don’t have. Break out of the cubicle and be your own boss with these 9 super simple ways to make serious money from home.
  1. One great way to make money online is to use a site like Etsy or eBay to sell things you make yourself. If you have any talents, from sewing to knitting to carpentry, you can make a killing through online markets. People want items that are handmade, so join in!
  2. Before you set your heart on making money online, set your household up. Making sure you are free from interruptions can be a very important part of your success. Children, spouses and other people can cut you off at the most inconvenient times. Make sure your time is your own, so you can maximize earnings.
  3. Design unique logos for some of the new startup sites on the web. This is a great way for you to show the talent that you have and also help someone out who is not artistically skilled. Negotiate the price with your client in advance before you provide your service.
  4. Start out small when you want to make money online, to minimize potential losses. For example, something that looks promising could turn out to be a bust and you don't want to lose a lot of time or money. Do a single task, write just one article or order only one item until the site you choose proves to be safe and worthy.
  5. If you are knowledgeable about a particular subject, put your knowledge to work for you. There are many companies, such as about.com, that will pay you for your knowledge. Most of these sites do require you to write a certain number of articles each month; however, this is a fantastic way to bump up your earnings.
  6. Don't quit your day job until the online money making opportunity you're looking into starts paying off. While it could prove to be a jackpot, you don't want to risk being up the creek if it's not what you were hoping for. Always have enough money in the bank for a few months of bills, just to be on the safe side.
  7. If you do not want to put a large monetary investment into your online business, consider buying and selling domains. Basically, purchase a domain at a rock bottom price. From there, sell it for a profit. Remember, though, to do your research and figure out which domain names are in demand.
  8. To make real money online, consider launching a freelance writing career. There are numerous reputable sites that offer decent pay for article and content writing services. By checking into these options and reading feedback of each company, it really is possible to earn an income without ever leaving your home.
  9. Be grounded in your expectations about making money online. It still takes time and effort. Block out an hour a day from your schedule to spend online working on things, but do not quit your day job yet. It could be days or even weeks before you even know what you are good at.

Determination and education is all you need. After reading the tips above, you are ready to begin working online. And now, a bonus tip: Do guerilla marketing. Low-cost advertising techniques. Use a commercial copier at FedEX Office to print out flyers with your information and ways for people to find your business online. Use your website URL or Facebook page to connect with them. Cheap and easy.

Thursday, December 6, 2018

8 Great DIY Home Projects


When it comes to something like home improvement, you want to always make sure you know as much as you can so you can improve your home to the best of ability. Whether it’s about house painting, landscaping, or even installing a new roof, kitchen appliance, hardwood floor, or whatever… study up on the proper ways to go about making it happen the right way. Check out the following DIY home improvement tips to get started.
  1. In order to save money on air conditioning costs during the summer, try installing ceiling fans. Ceiling fans recirculate air within a room, cooling it down without the need for turning on a central air system. They are relatively easy to install and can be installed in place of your lighting fixture.
  2. When it comes to home improvement, go with your gut feeling about the contractor as long as everything else matches up. Do not even consider someone that you do not fully trust, as you probably have that feeling for a reason. If you have a hint of mistrust toward the contractor that you meet with, it may only lead to anger and mistrust on an exponential level if things do not go according to plan.
  3. Adding window blinds to your windows is a great way to accomplish a sense of privacy. Many people don't use curtains or blinds because they want to let in natural lighting. However, don't forget that you can see outside, but whoever is outside, can also see inside. Window blinds can add to your privacy and come in different styles to choose from. You don't have to go with the cheap plastic factory blinds. You can find some really nice wooden or bamboo shades that do the job, just as well.
  4. Rearranging your furniture can be fun, but oftentimes you need visual aides to determine where to put everything. A great way to arrange furniture with visual aiding is by taking a piece of graph paper and cutting out square shapes in a scaled format to represent your different pieces of furniture. You can easily toss your graph paper pieces around and decide how everything can fit together. It definitely saves you the trouble of pushing your furniture around first.
  5. When working on a home improvement project, make sure to buy high quality materials. You can save money initially if you buy appliances or cabinets that have imperfections but using these materials could reduce the value of your residence. If you always purchase the best for your home, the results will be astonishing.
  6. Write out a list of all things that your home needs before you set out to your favorite home improvement store. When you make a list, you ensure that you don't make a lot of trips to the store. It also keeps you organized.
  7. The kitchen is usually the room that sells the place. Take a look around and see if there are any inexpensive things you can do to your kitchen to make it look recently update. Get rid of that wallpaper or add hardware to your cabinets. Do whatever is simple and quick, but effective. You will be able to mention the update in you listing and buyers like seeing that.
  8. When it comes to interior house painting, you may be tempted to Google “local painters” because, let’s face it, painting can get messy. However, you can DIY. Try to do all your painting in daylight hours, as artificial light can cause you to miss small areas. Tackle the ceiling first, painting around the edges in bands, and working your way into the center. The walls should be painted starting at the top, and working downwards in sections.

If you want the house of your dreams, then you need to do your homework and plan properly. The way to see improvement is to get started, and there is no better time than now. What are you waiting for?

7 Pro Roofing Tips


If you need roof help – roof repair, gutter installation or gutter repair – you probably want to hire a roofer to do the job. After all, these aren’t the easiest do it yourself home improvement projects. However, finding a contractor you can trust is much easier said than done.

You can either Google “roofer near me” or “gutter installation near me” and roll the dice, or simply use the tips below to help you find a trustworthy contractor.
  1. If you're looking into hiring a roofer, the first question you should ask is how long the company has been in business. Someone might sound great on paper, but if they're new to the game, they may still be ironing out kinks in their business practices. You don't want to be the one they test things out on.
  2. In order to ensure that your roof stays in good condition, make sure that you trim the trees in the surrounding areas. This will prevent any branches from scuffing the surface of your roof which could eventually lead to more serious problems. This also helps prevent any fungus or mold grow on your roof.
  3. If you have a leaky roof, make sure that your gutters are clear. If there is no way for water to drain, then the gutters can accumulate rainwater and cause leaks in the roof. Install ridge and soffit vents so you can prevent any dry rot from developing on your roof.
  4. Only ever hire a roofer who has a license and is fully insured for the job. If anything happens while they are working, be it a worker who falls off the roof and is injured or a worker who falls through your roof and destroys your valuables, you'll be pleased you held out for the right company!
  5. If a deal seems too good to be true, it probably is. Calling around for different quotes for your roofing job is important to ensure you get the best price. However, if a contractor is offering their services way below the average, ask yourself why. It could very well be a good deal, but it could be a scam as well.
  6. If you want a "greener" roofing option, you may want to consider installing a living roof. A living roof has layers of soil in which a plant or flowers can be grown. While only meant for flat roof surfaces in certain kinds of climates, living roofs are great for insulation.
  7. If your roof needs a repair, it is possible that you could tackle the situation yourself if you have the knowledge. However, it is important that you wait for proper weather conditions, as roofing can be dangerous work. Working in weather that is not dry could result in serious injury or death.

Having read the article above, you should now have a much better understanding how to address any of your roofing needs. Be sure and use the advice given in order to maintain your roof so that it will last you years without any problems. Doing so will not only save you money, it will keep you and your family safe.

Tuesday, December 4, 2018

How Hospitals Help the Local Community


If you watch the news, read the paper or cruise the social media threads, you are well aware that the concept of US healthcare is a ping pong ball being knocked back and forth across the net between those who feel the our doctors are honestly trying to keep us healthy, and those who feel the whole industry is designed to keep us sick. It’s not a new concept, but with the advances in communication over the years, the debate is reaching more and more people.

Where does that leave the actual brick-and-mortar hospitals and medical centers who are stuck in the middle of this debate? A recent article from The American Hospital Association had this to say about how, despite the growing debate, hospitals are still a force for good in their communities:

The billions that hospitals spend on an array of activities, such as wellness programs, transportation and housing assistance among other community-oriented projects, are not accounted for in basic financial reports. The bottom line: Hospitals continue to provide tremendous benefits to the communities they serve. 
Hospitals also use their resources to reinvest in new models of care that go well beyond the traditional hospital walls, finding new ways to help improve the health of their communities—from providing access to medical care for patients in rural areas to supporting cutting-edge medical research and innovations. Hospitals are also working tirelessly to address and combat the social determinants of health, such as poverty and violence, that harm individuals’ ability to achieve well-being. 
Despite these daunting financial challenges that many hospitals face, our commitment to our mission remains unshakable: to provide a wide array of benefits tailored to the particular needs of the communities we proudly serve.

No matter which side of the healthcare debate you stand on, your local hospitals and medical centers are still there, still struggling to stay open, staffed with a team of doctors, specialists and surgeons, who stand ready to help heal any ailment you or the community has.

If you aren’t aware of your local hospital, simply Google “medical center near me” and a list of hospitals, clinics and surgical centers will be made available to you.

About a Local Dallas Hospital


“Cannot thank the nurses and staff enough. 100% confident on care that is a major relief. They took excellent care of my husband after his knee replacement.”

If you live in Dallas or a nearby suburb, you have a litany of hospitals, specialty clinics and surgical centers to choose from, but not all are created equal. If you haven’t heard of Pine Creek Medical Center allow this brief article to acquaint you with this Dallas Texas hospital that’s private, state-of-the-art, and features the most advanced level of technology.

Pine Creek Medical Center is a 100% physician-owned and operated surgical hospital serving more than 3 million people in Dallas-Fort Worth and surrounding cities. With a sophisticated environment, highly trained staff, and advanced technology, doctors make each patient the top priority of the day.

The JCAHO-accredited Center of Medical Excellence is staffed by 170 physicians representing all specialties, including many who are listed among D Magazine’s Best Doctors.  With one of the area’s lowest patient-to-nurse ratios, acute care experienced nurses assure patients receive personalized care as patients undergo leading-edge surgery and procedures in the areas of the spine, orthopedics, bariatric, urology and other specialties.

MISSION

Pine Creek Medical Center is committed to delivering the finest quality care with compassion and kindness while providing for the personalized needs of our patients and their families.

VISION

The vision of Pine Creek Medical Center is to be the leader in delivering the highest quality care through exemplary services and processes to the exclusive benefit of the individuals, families, and communities we serve.

VALUES

Dignity – Honor and respect for the worth of every person.
Compassion – Embrace every individual’s physical, emotional, ethical, and personal concerns.

Excellence – Commitment to the highest standards of service and performance.
Integrity – Honesty, justice, and consistency for all our patients, physicians, and other relationships.

You may reach out to Pine Creek Medical Center at (214) 231-2273 or visit them online via their website at www.PineCreekMedicalCenter.com

Friday, November 16, 2018

Land Clearing Services - Ft. Worth


Need Dozer Services in Fort Worth?

Residential. Ranch. Commercial. Industrial. We do it all. If you need dirt moved around or removed, Marley Dozer Service moves it.

We know we’re not the only excavating contractor in Fort Worth, but we guarantee we’re the most dedicated to making sure your job gets done right the first time.

We’ve been working in the land clearing, bulldozer services and dirt work services industry for many years now and we know North Texas land just about as good as anybody. Our state has various types of soil and each kind needs a different approach to make sure your project has a proper foundation to be built upon.

Rest easy and put your next job in the trustworthy hands of Marley Dozer Service and let us handle your Fort Worth excavating and dirt work needs.

What Marley Dozer Services Does:
  • Brush & Land Clearing - Implement a technique called “Brush Chaining” we pull a 250-ft. ship chain in a “U” shape for mass brush clearing and reclamation.
  • General Construction - Pads made for residential homes, rural barns, commercial businesses, industrial warehouses, and more.
  • Pond & Tank Creation - Build ponds (also called tanks) of various sizes in accordance to your land needs and capabilities. No pond is too big for Marley to handle!
  • Pond & Tank Cleaning - Remove silt and mud that accumulates in older ponds/tanks. We clean, and if necessary, rebuild existing ponds to optimize capacity and water retention.
  • Root Plowing & Removal - In a technique called “Rome Plowing” they use a large, offset disc plow that cuts and chops tree roots and stumps, in addition to any small debris.
  • Road Construction - Construct, water and grade new and existing gravel and crushed rock roads for rural, residential and commercial properties.


Thursday, November 15, 2018

How the Copy Machine Was Invented


Every good superhero has a great backstory. A tale of their beginnings. A recounting of their origin and the obstacles that shaped them into who they are when we meet them. Today that superhero is the office copy machine. Unsung, sure. Overlooked, definitely. Invaluable, without a doubt.

Allow the splendor of Wikipedia’s universal brainpower to recount the tale of the humble photocopier. Our story begins in the late 1930s in a New York patent office…


Chester Carlson, the inventor of photocopying, was originally a patent attorney, as well as a part-time researcher and inventor. His job at the patent office in New York required him to make a large number of copies of important papers. Carlson, who was arthritic, found this to be a painful and tedious process. This motivated him to conduct experiments with photo conductivity.

Carlson used his kitchen for his "electrophotography" experiments, and, in 1938, he applied for a patent for the process. He made the first photocopy using a zinc plate covered with sulfur. The words "10-22-38 Astoria" were written on a microscope slide, which was placed on top of more sulfur and under a bright light. After the slide was removed, a mirror image of the words remained. Carlson tried to sell his invention to some companies, but failed because the process was still underdeveloped. At the time, multiple copies were most commonly made at the point of document origination, using carbon paper or manual duplicating machines, and people did not see the need for an electronic machine. Between 1939 and 1944, Carlson was turned down by over 20 companies, including IBM and General Electric—neither of which believed there was a significant market for copiers.

In 1944, the Battelle Memorial Institute, a non-profit organization in Columbus, Ohio, contracted with Carlson to refine his new process. Over the next five years, the institute conducted experiments to improve the process of electrophotography. In 1947, Haloid Corporation (a small New York-based manufacturer and seller of photographic paper) approached Battelle to obtain a license to develop and market a copying machine based on this technology.

Haloid felt that the word "electrophotography" was too complicated and did not have good recall value. After consulting a professor of classical language at Ohio State University, Haloid and Carlson changed the name of the process to "xerography," which was derived from Greek words that meant "dry writing." Haloid called the new copier machines "Xerox Machines" and, in 1948, the word "Xerox" was trademarked. Haloid eventually changed its name to Xerox Corporation.

In 1949, Xerox Corporation introduced the first xerographic copier called the Model A. Xerox became so successful that, in North America, photocopying came to be popularly known as "xeroxing." Xerox has actively fought to prevent "Xerox" from becoming a genericized trademark. 

While the word "Xerox" has appeared in some dictionaries as a synonym for photocopying, Xerox Corporation typically requests that such entries be modified, and that people not use the term "Xerox" in this way. Some languages include hybrid terms, such as the widely used Polish term kserokopia ("xerocopy"), even though relatively few photocopiers are of the Xerox brand.
In the early 1950s, Radio Corporation of America (RCA) introduced a variation on the process called Electrofax, whereby images are formed directly on specially coated paper and rendered with a toner dispersed in a liquid.

During the 1960s and through the 1980s, Savin Corporation developed and sold a line of liquid-toner copiers that implemented a technology based on patents held by the company.

Before the widespread adoption of xerographic copiers, photo-direct copies produced by machines such as Kodak's Verifax were used. A primary obstacle associated with the pre-xerographic copying technologies was the high cost of supplies: a Verifax print required supplies costing USD $0.15 in 1969, while a Xerox print could be made for USD $0.03 including paper and labor. The coin-operated Photostat machines still found in some public libraries in the late 1960s made letter-size copies for USD $0.25 each, at a time when the minimum wage for a US worker was USD $1.65 per hour; the Xerox machines that replaced them typically charged USD $0.10.

Xerographic copier manufacturers took advantage of a high perceived-value of the 1960s and early 1970s, and marketed paper that was "specially designed" for xerographic output. By the end of the 1970s, paper producers made xerographic "runability" one of the requirements for most of their office paper brands.

Some devices sold as photocopiers have replaced the drum-based process with inkjet or transfer film technology.

Among the key advantages of photocopiers over earlier copying technologies are their ability:
  • to use plain (untreated) office paper
  •  to implement duplex (or two-sided) printing
  •  Able to scan several pages automatically with an ADF
  •  to sort and/or staple output

If your business needs a Sharp copy machine, contact A1 Image today for the best deals and service to buy or lease a copier.

The Magical World of Copy Machines

While waiting for your turn at the office copy machine to get those latest reports or make duplicates of your grand proposal, you may have found your mind wandering to such things as by what magic does this copier produce exact replicas?

What sorcery is involved that allows for hundreds of cloned copies to shoot out of this bizarre machine at such a speedy rate? Well, today is your lucky day because thanks to the power of Wikipedia, we’ll spell out just how that commercial copier works, step by step.

Step #1

Charging: cylindrical drum is electrostatically charged by a high voltage wire called a corona wire or 
a charge roller. The drum has a coating of a photoconductive material. A photoconductor is a semiconductor that becomes conductive when exposed to light.

Step #2

Exposure: A bright lamp illuminates the original document, and the white areas of the original document reflect the light onto the surface of the photoconductive drum. The areas of the drum that are exposed to light become conductive and therefore discharge to the ground. The area of the drum not exposed to light (those areas that correspond to black portions of the original document) remains negatively charged.

Step #3

Developing: The toner is positively charged. When it is applied to the drum to develop the image, it is attracted and sticks to the areas that are negatively charged (black areas), just as paper sticks to a balloon with a static charge.

Step #4

Transfer: The resulting toner image on the surface of the drum is transferred from the drum onto a piece of paper with a higher negative charge than the drum.

Step #5

Fusing: The toner is melted and bonded to the paper by heat and pressure rollers.

A negative photocopy inverts the colors of the document when creating a photocopy, resulting in letters that appear white on a black background instead of black on a white background. Negative photocopies of old or faded documents sometimes produce documents which have better focus and are easier to read and study.

So, there you have it. It wasn’t Harry Potter or Harry Houdini after all. It was science that made your copies and printouts appear from thin air. Mystery solved. And speaking of mysteries, if you don’t know which commercial copier is right for your office, connect with the experts in all things copy machine at A1 Image. They’ll walk you through every possibility and determine the right fit for your office.

Wednesday, November 14, 2018

Make Your House Look Better


Home improvement projects aren't purely cosmetic; they can increase the value of your property by hundreds or even thousands of dollars! Some do it yourself jobs are enjoyable like choosing new decor, and some are geared towards upping your home value like exterior house painting and fresh landscaping. This article will provide you with some useful suggestions for both.

Improve your home by cutting your energy costs. Check with your utility company to see if they offer energy audits of homes. There are a lot of changes you can make to make your home more energy efficient saving hundreds of dollars a year depending on the amount of changes you can make. It also adds a great selling point for a house for the future.

Create a catching focal point in your living room or hallway by hanging a collection of mismatched silver serving trays. They not only add an interesting extra to your home, but they are mighty fun to collect. Go to flea markets, antique stores or second hand shops, to find the most interesting trays you can display.

Many people think a kitchen remodel can be time consuming and expensive. In an ideal world, you create a new environment with fresh interior home painting and new, shiny appliances. However, there are many things a homeowner on a limited budget can do to change the look of their kitchen. By simply replacing countertops, updating appliances or refinishing cabinets, a homeowner can give their kitchen a facelift without breaking the bank.

When you are remodeling your bathroom, make sure not to add carpeting to the floor. Not only does carpeting stain easily, but the water from the shower will give the carpet, and subsequently your whole bathroom, a foul odor. Instead, go with a tile that can withstand any water that may get on the 
floor.

If you’re in the North Texas area, connect with Your Home Improvement Hero, Rock Painting & Gutters, today. In addition to complete home renovation services, they are the premier Frisco painters and McKinney painters of choice!

Hot Home Improvement Tips



Home improvement projects have the potential to make or break your wallet, your investment and your resale value. This article will give you lots of great advice on how you can protect the investment you've made, get the best bang for your buck and not go broke in the process.

Add a fresh coat of paint to your doors to cover up the wear of everyday use. After a while the doors get a grimy bland color, so applying a new coat can make your doors appear new and add brightness to the inside of your house. Black is the latest popular exterior front door color that adds to the curb appeal and helps sell a home (if that’s your aim.) Speaking of color, exterior house painting will do wonders for improving the look and feel of your home. Not so much a DIY project, so call in your local painting company for this one. To make it easy, just Google “local painters” to get a list of options.

Here's a simple way of fixing gaps at the bottom of poorly fitted interior doors. Sandwich a section of timber (cut to the width of the door) between two pieces of paneling. Leave each piece of paneling sticking out beyond the upper side of the two by two by about one inch. Slip the extension over the bottom of the door and screw each piece of paneling into place against each side of the door.

Considering the cost of hiring a plumber, you will probably want to do some of the simpler plumbing tasks yourself. An essential tool is the pipe wrench. It is adjustable, so it can fit a pipe perfectly, and it provides an excellent grip and leverage. This one tool will more than pay for itself.

Adding attic insulation can help you save money on winter heating bills. Because heat rises, many homes with poor insulation lose heat through the roof during the cold weather months. Most hardware stores sell insulation, and installing it yourself is relatively simple.

If you are doing work near a kitchen, fireplace, or gas appliance, make sure you know where the gas shutoff for your home is located. If there were to be an accident, and gas started leaking into your home, the smallest spark could set it off. If you know in advance where the shutoff is, you can respond faster to the issue before it becomes an emergency.

For a personalized and one-of-a-kind wall covering, consider designing and ordering your own customized wallpaper online or through a local design studio. New websites offer a variety of options for wallpaper design, including enlarged photographs, murals, or even your children's artwork delivered to your door in a matter of weeks.

A chain-link or wooden fence may be a good idea if you've purchased a home near a woody area or undeveloped location. This can help keep annoying animals out of your yard.

One of the best lighting improvements for children's rooms, is adding in directional track lighting. This lighting can be adjusted to highlight artwork, different play areas or furniture. For an especially fun twist, replace one light with a brightly colored red, yellow, or blue light bulb. Track lighting is also timeless and makes the room more versatile, without appearing too childish.

As you can see, there is a lot involved in even the most simple of home improvement projects. But, if 
you follow this advice and use it to make really wise investment decisions, you should have no problem choosing the best projects and the best money saving ideas for your home.

Tuesday, November 13, 2018

Test Those Surfboard Fins First


How Surf Fins Work

Surfboard fins increase the control of a surfboard lift maintains the direction of the board Drag affects the speed of the board. Forward placed fins make a board more maneuverable. Fins closer to the tail make a board easier to control. The introduction of fin technology on a surfboard is one of the most important innovations in the history of surfing.

So how do surfboard fins literally work? We use surfboard fins to adjust the mobility, stability, and overall feel of a surfboard. The surf fins allow a board to be controlled in the water in a way that would be impossible without them. They help to maintain speed and control while cutting through the water.

Lift and Drag

Lift refers to the horizontal upward forces pressing against the board. The lift helps to keep the board moving in a particular direction and assists the rider with maintaining a straight line or to turning as the fins push against the water.

Drag is the force that slows you down. The amount of drag can be customized to a degree by increasing the surface area of the fins – meaning the more fins, or the wider the fin, the more drag. Greater surface area from your fins will allow for more control, which is great for someone learning to surf, but tends to slow the board down. Less surface area allows for more speed but can make the board harder to control.

Surf Fin Setups

The placement of the surf fins impact the way a surfboard can turn and maneuver. If the fins are located in a more forward position, the board will be able to make sharper turns. The further back the fins are the wider the turns will have to be. While a more forward placed setup allows for more maneuverability, balance is sacrificed in the process.

Choosing the best fin setup for your surfboard can be quite a daunting task. With so many fin designs and placement options, it can often be difficult to decide what to go with. Many surfers prefer a board with a 5-fin setup. This allows them to change their fin setup on the fly, without having the expense of a completely new surfboard.

Since there are so many surfboard fin setups to choose from, why not try them all? That’s right. Finatic.com is all about letting you try as many surf fins as you want so you don’t limit yourself. Give them a shot and never settle for one setup when you can have them all!

Best Surfing Quotes


Surfing has been described as akin to riding the perfect storm. A simultaneous occurrence of events that provide an opportunity to become one with nature while experiencing the magical feeling of flying we imagined as kids along with the sense of achievement that we crave as adults. Total fulfillment on all levels; hence the addiction.

Now before you ask what this has to do with life, business, or anything other than surfing, take the following quotes and don’t think of them as simply talking about literal waves and obstacles, but metaphorical ones as well.

“It’s not tragic to die doing something you love.” – Mark Foo

“Waves are not measured in feet and inches, they are measured in increments of fear.” – Buzzy Trent

"We're all equal before a wave." – Laird Hamilton

“My passion for surfing was more than my fear of sharks.” – Bethany Hamilton

"There is nothing, nothing, more sad than a surfer who used to surf." – Unknown author

"You can't stop the waves, but you can learn to surf." – John Kabat-Zinn

“The best surfer out there is the one having the most fun.” – Phil Edwards

Marinate on these quotes and see how they can enhance your life in every arena. Now, if you are a surfer, then you can use them twice as much. And while you’re pondering those immortal words, cruise on over to your favorite surf shop online and grab some new surf accessories like a surfboard bag, a few surfing wetsuits, or if you’re in the market, a brand new surfboard to ride the waves as you contemplate life.